Phone call external functions hear many people also use it to listen to music with your Android phone is more than a little happy to have more options as well as custom software to listen better. Post instructions on how to install the Walkman software, along with Viper4Android PureXAudio FX, and IRS Viper4Android XHiFi
Equalizer. This Combo for computers running Android 4.x (JB / ICS). After installing the software, you will have the Sony Walkman music player with sound PureXAudio, custom Viper4Android special mode. Longish post and is updated regularly so should read a few times, execute.
Equalizer. This Combo for computers running Android 4.x (JB / ICS). After installing the software, you will have the Sony Walkman music player with sound PureXAudio, custom Viper4Android special mode. Longish post and is updated regularly so should read a few times, execute.
REQUIREMENTS: MACHINES HAVE ROOT
ALL WHAT YOU NEED TO UPDATE + DOWNLOAD HERE ARE LOCATED IN OUT
NOTE AFTER YOU INSTALL THE COMPLETE GUIDE TO READ THE RECOVERY OF COMMON ERRORS BELOW LAST LECTURE.
The following article I will guide you to install the software player:
PureXAudio Walkman + + + Viper4Android XHiFi Viper4Android FX + IRS Equalizer
Note this is the only software for machines running stream JB / ICS
Particularly Viper4Android Viper4Android XHiFi + FX + Equalizer IRS, the series ran GB can also run well, have not experienced the Walkman + PureXAudio, but for the life 2.3.x is also known as the first breakthrough.
NOTE: REMEMBER TO READ CAREFULLY AND YOUR RIGHT STEPS HAVE INSTRUCTIONS, BECAUSE YOU HAVE THE TEST AND CUSTOM MADE OPTIMAL, other parts are relatively easy, YOU CAN ADJUST YOUR own discretion.
NOTE: Before installing this game 4 dishes, then you must install Busybox very last
Open Busy Box to wait for it to load 100% then click Install - Smart install
First you download 2 software + PureXAudio Walkman, I have collected 1 link at the top of the page, on which you can download.
First-Wipe Cache Partition --- Wipe cache Davilk
-Flash the Walkman mod by thuyduong
-Then install the Walkman by Ravi override
- Then Wipe cache, cache davilk again.
- Flash PureXAudio
HTC lines, S3, NOTE 1 & 2, NEXUS IS JUST INSTALLED BY RAVI AND THE WALKMAN PUREXAUDIO.
IF IN THE SETTING-SOUND - MUSIC THAT DOES NOT SOUND EFFECT ENHACEMENT (IMPROVED SOUND) THE TAKING ROOT EXPLORER INTO YOUR SYSTEM - APP THEN REMOVE FILE SOUNDENHACEMENT.APK reboot, DOWN FILE soundenhacement.apk in the download folder Top off the system - install = app or hands.
Purex http://d-h.st/D8h Universal LITE
NOTE:
-1 DO SOME MACHINE OR A COMPATIBLE ROM KO Ken, M7 V4.0 WHEN TO FLASH THE BOOT WILL BE SUSPENDED, THE FLASH THAT COME TO THE M7 V3.0 CAN TEST TEST, AND STILL BE SUSPENDED IF THEN FLASH THE BOOT LITE UNIVERSAL FOR THE MAY EXPERIENCE.
-IF YOU DO NOT FEEL FOR UP TO 1 THE CLEAN ROM, INSTALL OR THE M7 V4.0 V3.0 (DOWNLOAD LINK IN FIRST PAGE PAGE SOURCEFORGE.NET)
http://dh.st/b3e <=== PUREXAUDIO V15 ONLY FOR XPERIA Z / ZL
After the download is complete step 2 above, the CWM and install your Walkman as follows:
- In CWM --- Wipe Cache and Cache Davilk
- Then the Sony Walkman Xperia Z FLASH and the file belongs to the Walkman
- Repeat steps 1, Wipe Cache and Cache Davilk
- Then the Flash PureXaudio.
- Restart the phone
So you have installed the Walkman + PureXAudio, the next will be Viper4Android XHiFi + FX + Viper4Android IRS Equalizer, download link at the top.
In the FX + loads of Viper4Android Viper4Android will XHiFi 2 for the 2.3.x and 4.xx depending of how much you are spending is the only properly installed, unzip the installation file when that format is. APK your plants. Install the APK file so you just need to install normally, or can use root explorer to copy apk file off the system 2 - app then reboot the machine, in order to achieve optimal performance, avoiding errors Classified
For HTC line, then you copy the APK file to the machine --- 2 root explorer copy to system --- app --- reboot.
Viper4Android FX will give effect to the sound.
Viper4Android XHiFi will most standard audio, High Quality.
The IRS down on you after the first extract the folder, copy it to the phone.
NOTE: XHIFI Once installed FX AND OPEN UP THAT YOU DO NOT ALLOW THE USER IS SUPER SUPER USER IN FACTORY OPEN UP YOUR RIGHT TO SEE FX LEVEL AND HAVE NOT XHIFI, IF NOT THEN YOU CLICK AND CHOOSE THE FIRST LINE FIRST LINE IS GRANT --- GLOBAL DEFAULT IS PARTY 2 ===> SAVE THE
+ Install Viper4Android FX ---- Now open up --- Update --- Choosing the right click of the phone CPUs are spending their
+ Viper4Android XHiFi --- do step on
- NEW FX-2207
ZTE U880 or same CPU (PXA920), choose "Without VFP (PXA920)" (Convolver disabled)
Tegra2, or any ARM CPU freq with equal / less than 800MHz, choose "With VFP"
Coal of higher freq 800MHz Qualcomm - single / dual core, choose "CortexA8 with NEON"
ALL other dual-core, quad-core, Octa-core, choose "CortexA9/15 with NEON"
-NEW 2100 XHIFI
Tegra2, choose "NVIDIA Tegra2"
ALL others, choose "CortexAx with NEON"
Then you open the FX and XHiFi V4A turn up to select the following:
- Of the option you select "Switch to Safe Mode" and select "FX Compatible Mode --- select Compatilble"
Then very Setting - select Sound --- Sound Effect Music Enhacement <=== doctors to spend JB / ICS + PureXAudio walkman install new lines dentist, the doctor spent 2.3.x then just restart it.
NOTE: THE EFFECT OF THE MUSIC YOU CHOOSE 1 OUT OTHER EFFECTS AND XHIFI FX, FX MUSIC EXAMPLES YOU CHOOSE 1 TIME THEN IT WILL START THE MUSIC FX --- 3 --- XHIFI V4A FX
Restart the Phone
The physicians in turn customize as follows:
- For Walkman:
After opening Walkman setting up --- Unknown --- has 2 modes:
+ ClearAudio is going to sound self-calibration yourself
+ --- The Equalizer Sound Enhancement you click on and select User-defined 2 with custom columns from left to right as follows "-2 -5 +4 +5 +0" <--- this is the mode HiClarity <--- recommended for this mode.
+ Beneath the ClearBass, you can increase or decrease according to its members, to +4, powerful bass to the increase.
+ Next to the word the word Equalizer Settings --- you click on and activate the Surround Sound mode --- there are 3 modes to choose from, with photos and you look at is going to understand and be can experience <--- Studio mode is recommended
+ In the Dynamic Normalizer you uncheck the stick, because if you stick to it when the volume exceeds song allows it to automatically lower small, so that shortfalls.
- For Viper4Android FX:
The FX V4A you open up and tune in the Headset as follows:
- Master Power: check
-Convolver: check
-Impulse Response of wealth and you press select EQ mode 1 in the following:
Impulse w + SPL GoldMike Flair
+ DBX
+ JoeMeek
- The other part does not check
(Note when you select it will report Impulse Reponse is not found in the path sdcard folder - Viper4Android --- Kernel, this time you open up Root Explorer, copy all the folders in the IRS earlier in the you just down the path to sdcard - Viper4Android --- Kernel)
- For Viper4Android XHiFi:
Open to V4A XHiFi up and adjustment of the Headset as follows:
- Master Power: Check
- Playback Control: Check (this part is turning up the volume to the default DC also, he wants to poke poke a few adjustments, the effect is instant yah know)
-Fire Equalizer: Check and select Preset is Ascoutic (can choose if you want to reduce the bass Reduce Bass or Vocal Boost to select the wine).
- Audio Reconstruction: adjusted as follows
+ HiClarity: 100
+ Lo Contour: 50-70 <== physician to adjust the bass player hit 70 it was buzzing down slowly, this is the bass reproduction.
That's it, you can experience your music to the tune Viper4Android Viper4Android XHiFi FX + is that it will operate in parallel, the machine does not have life 2.3.x + PureXaudio Walkman, pick 1 of 2 Viper4Android Viper4Android XHiFi the FX +, which is also DC
Source: Compiled from sources XDA
http://db.tt/2iEho6jZ <=== For physicians that extreme crisis like the sound from internal speakers to external speakers with this file or external speakers when listening to music, the doctor just to be approved only 20% volume numbness
- Use root explorer to system / etc, copy the file default_gain.conf and retain your custom elsewhere. This step helps you to turn to the stock volume.
- Then just copy down at the Mod file in system / etc, reboot and enjoy
AFTER YOU INSTALL THE SUCCESS AND GOOD RESULT IF THEN PLEASE POST THIS SERIES UP TO YOU KNOW YOU'RE Xai SERIES MAY BE RUNNING WELL, TO SEE THE PROBLEMS AFTER SETTLEMENT MAY more alert.
FOR WALKMAN Z:
-Why did you install on the phenomenon Walkman No Sound / Can 't Play Tracks?
You can use Root Explorer to system - vendor - copy 2 files etc audio_policy.conf audio_effects.conf and give back to the system - etc - reboot the phone.
Can not install Sound-Enhacement by Rom not compatible, resulting in the setting of defective parts Musicfx setting - music effect?
You can use Root Explorer to system - vendor - copy files etc audio_effects.conf put back into the system - etc - reboot the phone.
-Why was Force Close Download Music Info on JB Rom, can not choose to be part of My Music?
Use Root Explorer to system - app deleted file and reboot the phone SemcMetaDataCleanup.apk
-Why did you choose settings - music effect - Sound Force Close enhacement be?
A: just delete the file SoundEnhancement.apk system> app and reboot the phone, via CWM Flash back to the PureXAudio
FOR VIPER4ANDROID:
Updated 05/09/2013
-Why did FX Compatible Mode switch that V4A not work?
A: The fix is as follows:
1.Open up / system / build.prop
2.change the line lpa.decode Ipa.decode = true to = false
-V4A work on my device is not?
V4A works well on most Android devices have been Root.
-How to install?
Copy the APK file 2, using Root Explorer copy the System - app then reboot for best results.
-Choose one? FX - XHiFi or install the 2?
FX will specialize sound effects will also XHiFi for most standard sound, the best way is a combination of the two, of course, will cost more CPU machine, but not significantly
Why V4A-FX and XHiFi or Force Close?
because the driver has not been fully installed, uninstall and re-install by copying the System - app - reboot.
Why V4A-FX and XHiFi for the different effects depending on each user?
Clear FX and XHifi V4A data, adjust settings - the effect of the default music or original Sound enhacement, do not use the built-in software such as Noozxoide, Beats, Bass boots ..
-Power AMP and TTPOD, other programs have been V4A spend it?
Open the Safe Mode switch V4A --- Compatible FX adjustment, Power AMP is open for PowerAMP settings - Audio - Avandce Tweaks - Direct Volume Control ---> turn off
Why V4A-FX and XHiFi not work after a reboot?
Check-virus software or app startup manager view V4A have not disabled, if they open it up.
Why use V4A-feel and noise being shy?
This is your fault musicFX, most of the lines are (if you choose musicFX comes with FX-XHiFi V4A)
overcome as follows: Backup and Delete / system / lib / soundfx / libbundlewrapper.so
- Why XHiFi sound effects of lost work when volume increases to about 70%?
Because hearing protection mode, this common on Sony, one of the other models mentioned having such a condition, the remedy is as follows: Backup and Delete / system / lib / soundfx / libhearingprotection.so
-Why did not feel the sound settings change after V4A?
Check that you have transferred to Safe mode and adjust FX Compatible yet.
-Why are small volume after listening to 10s?
It's possible that you have installed the software XLOUD 1, Clear Phase, S-Force faulty
-You can use one of V4A with sound software support others?
Yes, and remember to tune into FX compatible V4A Mode
Why the ear-phone jack on the phone is reboot? Most of the HTC line were
Remove and install V4A 2 by removing the APK file system - app - reboot
-I do not know what is my CPU?
NEW FX-2207
ZTE U880 or same CPU (PXA920), choose "Without VFP (PXA920)" (Convolver disabled)
Tegra2, or any ARM CPU freq with equal / less than 800MHz, choose "With VFP"
Coal of higher freq 800MHz Qualcomm - single / dual core, choose "CortexA8 with NEON"
ALL other dual-core, quad-core, Octa-core, choose "CortexA9/15 with NEON"
NEW 2100 XHIFI
-Tegra2, choose "NVIDIA Tegra2"
ALL others, choose "CortexAx with NEON"
-V4A-Driver status display version 0.0.0.0?
Due to incorrect driver installation of the CPU
-Driver status display "Enabled: No, Processing: No" - despite opening effect?
When switching to FX Compatible Mode, Driver Status is always No, but it still works well, to make sure you open the music up, on / off to see the difference.
-Why MIUI Player does not work?
Open V4A select FX Compatible Mode or turn off the default MIUI
Source: Tinhte